Denon Professional Delta Series - Frequently Asked Questions
Denon Professional's Delta series is a full line of elite speaker systems, each designed to exacting standards with premium, purpose-matched components, wireless capability, and immense built-in power. This article walks through a number of Frequently Asked Questions about the Denon Professional Delta series speakers.
Getting Started - The Live Drive App
Denon Professional has partnered with Alto Professional to allow the Alto Professional Live Drive app to function with the Denon Professional Delta Series speakers. The free Live Drive app puts the power of the Delta Series in your hands and adds immediate increased flexibility to your Denon Professional Delta Series speakers. Among the many benefits of the Live Drive app is the capability to adjust the mix and levels of your Delta Series speaker wirelessly, as well as adding increased functionality and improved performance. Denon Professional recommends downloading the Live Drive app to allow your speaker to perform at its optimum potential.
Frequently Asked Questions
- Where can I obtain the Live Drive app?
- How does the Live Drive iOS app connect to Delta series loudspeakers?
- How many speakers can connect to the Live Drive app simultaneously?
- Can both the speakers and the subs be connected to the Live Drive app at the same time?
- I lost my password for the Live Drive app. Can I reset it?
- Can I stream music via Bluetooth to my Delta series loudspeakers?
- What is the range of the Bluetooth signal?
- What happens if I go out of Bluetooth range with the Live Drive app running?
- Can I reset the Bluetooth signal?
- Can I reset all of the speaker settings to factory default?
- Where should I set the speaker volume controls?
- Will setting the volume control to MAX cause any damage to my equipment?
- Is the input still 0 dBu when I switch the MIC/LEVEL button to MIC?
- Can I use the Delta Series speakers outside?
- What type of EQ is available on the Delta series speakers? How does it work?
The Live Drive iOS app is available from the Apple App Store:
- Alto Professional Live Drive iOS App - for use with the Denon Professional Delta Series loudspeakers
Denon Professional recommends downloading the Live Drive app to allow your speaker to perform at its optimum potential.
The Live Drive app can be run from your iOS device so that you can wirelessly level-match, EQ, time-align, and more. Denon Professional recommends downloading the Live Drive app for increased functionality and improved performance, allowing your speaker to perform at its optimum potential.
The Live Drive iOS app connects to Delta series loudspeakers using Bluetooth. Simply press the Bluetooth button on your Denon Pro Delta Series speaker, go to your Bluetooth settings on your Bluetooth-capable device, and pair! This connection sends control data directly to the speaker's internal Digital Signal Processor (DSP).
Bluetooth allows for up to three items to be connected to the same device simultaneously depending on the IOS device you are using. The Live Drive app level meters will adjust accordingly - ie. if there are three speakers connected, you will automatically view three level meters, etc.
Yes. Any combination of Delta series speakers and subs can be connected to the Live Drive app.
The password is actually stored in the DSP of the speaker itself. To reset the password, do a Factory Reset on the speaker. Press and hold the DSP button for 10 - 15 seconds until the lights above the button flash. Your speaker and password are now reset.
The Bluetooth connection is exclusively intended for control and visual signal monitoring from within the Live Drive iOS App. Audio cannot be streamed via Bluetooth to the Delta series loudspeakers.
The typical range is up to 80 feet (25 meters) indoors with a clear line of sight. However, the range may vary depending upon your source device and the environment.
If you are running the Live Drive app to control your speakers and you go of the Bluetooth signal range, first the fader controlling the speaker that is now out of range will grey out. This means there is a data loss but the Bluetooth signal is still able to connect if you re-enter the signal range. To regain the signal, simply move back into range. In most cases the speaker will automatically connect back up and you will regain control through the Live Drive app.
If you do not automatically regain control after entering back into the Bluetooth signal range, go to the Bluetooth settings on your device and choose to pair once again. You will now regain control of that speaker.
By pressing the Bluetooth pairing button once on the rear of the speaker, this will disconnect from your currently paired iOS device but will leave the Delta Series speaker as a connectable Bluetooth device in the settings. If you find that you need to reset the Bluetooth signal completely for any reason, hold down the Bluetooth paring button on the rear of the Delta Series speaker for 10 - 15 seconds and the pairing light will begin to blink. The Bluetooth pairing record has now been wiped out from the DSP. To re-Pair, simply press the pairing button again and then go to the settings on your Bluetooth compatible iOS device and re-Pair to the speaker.
You can initialize all of the settings in the speaker by pressing and holding the DSP button on the rear panel for 10-15 seconds. The lights above the DSP button will begin to flash, indicating the reset is taking place.
The Delta series loudspeakers have been optimized for clear, undistorted sound at any volume level. Please take a moment to familiarize yourself with the advanced capabilities of these speakers:
- The volume control is an attenuator
- In most cases you will set the control to MAX (0 dB) and control your overall volume from your audio mixer.
- If desired, you can attenuate the speakers, but the circuitry has been designed to have low noise and high dynamic range at the MAX position.
- When connected to an audio mixer or other pro-audio gear (usually from 1/4" XLR stereo outputs):
- Run the volume control at the full clock-wise or MAX (0 dB) position.
- Set the LINE/MIC switch to LINE.
- When connected to a mobile phone or consumer AV equipment (usually from 1/8" or RCA stereo outputs):
- Turn the volume knob to the < mark shown on Input 1. If your speaker does not have the < mark, see the information here.
- Set the LINE/MIC switch to MIC. Note, the LINE/MIC switch applies only to INPUT 1.
The 0 dB setting for the volume control is at the full clock-wise (MAX) position. When connecting the Delta series to the output of a mixer, signal processor, or other device with a line-level XLR or 1/4” output, the volume control on speakers' rear panel should be set to the 0 dB (MAX) position. If your mixer or signal processor has a +4 dBU /-10 dBV selector set that control to the +4 position.
Delta series loudspeakers have been designed to have optimal gain structure to work with any +4 dBu signal source. Setting the input attenuator to 0 dB (MAX) will allow your mixer or signal processor to drive speakers to full output when your audio source's meters show output levels in the range of 0 to +10 dB, while maintaining 10 to 20 dB of dynamic headroom for clean undistorted playback.
To connect a signal source with -10 dBV outputs: Set the LINE/MIC switch to the MIC position, and turn the volume knob to the < mark shown on Input 1, which corresponds to between -20dB and -10dB. Typical -10 dBV output devices have 1/8” or RCA outputs. Examples include mobile phones, or consumer stereo and AV equipment. If your speaker does not have the < mark, see the information here.
If with the volume control at 0 dB, the SPL level from the Delta speaker is too high, you can reduce the SPL level by turning the attenuator’s counter-clock-wise as needed.
The below graphic shows the attenuation scale for the volume control for XLR and 1/4" TRS sources with the LINE/MIC switch set to LINE. Setting the Switch to MIC adds 40 dB of gain to the attenuation values shown below:
No. When set as described above, MAX corresponds to 0 dB. For line-level sound sources 0 dB is the intended normal position for the volume control. The gain structure of Delta series has been optimized to provide the best signal-to-noise and dynamic range when connected to a signal source with XLR or 1/4" TRS outputs with the volume control set to this position. Example line-level signal sources include audio mixers, DJ mixers, or rack mounted signal processors such as compressors and EQ's.
With the volume control knob set to MAX (or 0 dB), when you set the MIC/LINE selector to MIC, the input level becomes +40 dB. Setting this switch to MIC will add 40 dB to any of the values shown here. This is useful when connecting a dynamic microphone directly to INPUT 1.
The Denon Professional Delta Series speakers are not weatherized for permanent outdoor installation. While they can be used outdoors, we recommend to avoid exposing them to rain, snow, high winds, moisture or other potentially hazardous weather.
Press the DSP button on the rear of the Denon Pro Delta series speaker to set the loudspeaker's internal DSP to any of the following settings:
- Flat: No change to the audio.
- Contour: Boosted bass and treble with a gradual cut of mid-range frequencies—a useful setting for most contemporary music.
- 80Hz HP: Applies a high-pass filter. This is useful when using the Black loudspeaker as a crossover with a subwoofer that does not have a high-pass output. This setting is also useful for cutting all bass frequencies (e.g., for in speech-only applications, or when used as a delay or fill loudspeaker where the extra bass frequencies are not needed).
- Ext LF: Extends the loudspeaker's low-frequency response, providing increased output of bass frequencies.
- Custom: Applies your custom DSP mode, set in the Live Drive app.
Additional control of the DSP is also available using the Live Drive app.
Further Technical Support
Whether you are a customer or dealer, if you already own a Alto Professional product, or if you have pre-sales or parts questions, the Alto Professional technical support team is available to help!
Each product has a dedicated support page on the website where you can find manuals, specifications, software updates, and troubleshooting guides: www.altoproaudio.com
Visit the link below to connect with any of the following support options: online community support, phone support, email support.