Denon Professional DN-508MX - Frequently Asked Questions

DN 508MX PictureThe DN-508MX Zone Mixer is a refreshingly uncomplicated, high-performance solution for controlling and routing up to eight audio sources in multi-room venues. This article walks through a number of frequently asked questions about the Denon DN-508MX.

 

Frequently Asked Questions

 

What is the default password?

The default password to unlock the DN-508MX is: adminpwd 

 

How do I locate the IP address? 

With the DN-508MX connected to a network switch or router, use the Menu button and the Volume/Sel knob to do the following:

  • Press Menu.
  • To allow the unit to choose an IP address automatically, select System >Ethernet >IP Address, and finally Auto (you may have to enter the administrator password).
  • Set Auto to On, and select Yes when asked if you want to apply the change.
  • Navigate back to the IP Address screen.  It will now display a 12-digit IP address.

 

How do I access the DN-508MX web interface? 

Follow the steps above to obtain the DN-508MX IP address.

Once you find the IP address, enter it directly into your web browser to access the DN-508MX interface.

 

How do I lock the web interface? 

To lock the web interface, click on the Settings button at the top of the interface. Then click the lock icon at the top of the page to lock or unlock the settings. When locked, you cannot edit any of the settings. This is helpful to prevent any accidental changes to the overall operation.

 

How do I manage the zones? 

To select a zone:
Press the desired output selector. The currently selected one will be lit amber. The source selectors of any audio sources that are assigned to that zone will light up amber, as well. 

To assign or unassign an audio source to a zone:
Select the zone and then press the desired source selectors. The source selectors for currently assigned audio sources will be lit amber. 

To set the volume level of a zone:
Select the zone and then turn the Volume/Sel knob.

 

Can the DN-508MX be controlled remotely?

Yes!  With the DN-508MX, you have full remote control using the web interface (TCP/IP), RS-232, and RS-422 controllers.

 

What connections are available on this unit? 

On the DN-508MX there are a number of different input and output connections:

(6) 3-pin Euroblock inputs (1 hot, 1 cold, 1 ground)
(1) stereo RCA auxiliary input
(1) stereo 1/8” (3.5 mm) auxiliary input
(4) stereo RCA ST inputs
(4) 5-pin Euroblock outputs (2 hot, 2 cold, 1 ground)
(1) LAN port
(1) RJ11/RJ14 port, RS-422
(1) 9-pin D-Sub female connector, RS-232C
(1) 9-pin D-Sub male connector, RS-232C
(1) IEC power input

 

How do I perform a factory reset?

To do a factory reset on the DN-508MX, push in and hold the MUTE/BACK button and VOLUME/SELECT knob while powering on the unit.

 

What are the dimensions and how much does it weigh?

The DN-508MX weighs about 8.5 lbs and the dimensions are 19” x 13.5” x 2" (W x D x H - including rack ears).

 

 

Further Technical Support 

Whether you are a customer or dealer, if you already own a Denon Professional product, or if you just have pre-sales questions, the Denon Professional technical support team is available to help!

Visit the link below to connect with any of the following support options: phone support, email support.